Product Description
Screen Printing Hinge Clamp
It is constructed from cast aluminum, hold all wood or metal screens
from 5/8″ to 2″ thick.
Locking action firmly holds screens in place for positive registration.
This clamp can be screwed down to a surface to create a screen printing table.
Once the hinge clamp is screwed to your print surface(a table,piece of scrap plywood,old surfboard,etc)
The clamp part holds your screen frame.Drop,print,lift,remove printed material and place a blank to be printed,drop,print,and don’t look back.
Product description
In general, the screen printing frame requires at least 2 screen printing fixtures and 4 screws to secure.
Scope of application: for the fixing of wood screen printing frame or aluminum alloy screen printing frame.
For Starters, new beginners learn how to screen printing.
Screen Printing Clamp Features: The material is chrome-plated, it will not be rusted, durable and firm, and it can stabilize the screen without moving.
Instructions for use
1. Take a flat wooden board and draw a straight line on the board.
2. Take two points on the straight line, install the butterfly clip, and install one or several pairs in parallel according to your needs.
3. Install the online version, for the printing position, lock the chuck, flip the screen up and down, flexible and unimpeded can be put into use.
June 5, 2026
June 5, 2026
June 5, 2026
Product Category
